Designed with more personal use in mind, NISSEI's upper arm blood pressure monitor for home use supports people's healthcare management with its diverse functions.

Characteristics

Blood pressure measurement / Wrap cuff around upper part of arm to take a systolic and diastolic reading

Pulse pressure display for healthcare that's a step ahead

Pulse rate measurements / Pulse rates can also be measured along with blood pressure

Takes measurements while slowly inflating to alleviate stress on the arm

Irregular pulse rhythm symbol indicates insufficient detection of pulse wave during the measurement

Checks for body motion during measurements

Cuff status function checks cuff has been applied correctly

Reliability symbol indicates result of the measurement status check

Error code display allows easy identification of specific faults during measurements

Memory for 60 x 2 measurement results

Average of 3 readings in 15 minutes

Morning / Evening categorization

Can be used with either AC adapter or four AA alkaline (LR6) batteries

Clock function for recording date and time of readings

Corresponds to versions manufactured in Japan

"Reliability symbol" to support normal readings

Checking the status of the cuff wrapped around the arm and the state of rest during readings to notify you with a reliability symbol. The "Safe Measurement Navigation" loaded on the DS-N10 serves as a guide for taking accurate blood pressure measurements and resolves any uncertainty experienced during readings.

Check between morning and evening memory categories

In addition to the standard memory, DS-N10 is also equipped with morning and evening memory and automatically categorizes measurement results between morning (4 a.m. to 10 a.m.) and evening (7 p.m. to 2 a.m.). Using this function to check blood pressure more precisely enhances health management.

DS-N10 SPEC

Model

DS-N10

Measurement principle

Oscillometric method

Applicable arm circumference

22-42cm

Cuff

Preformed / ○
D-ring / ―

Automatic inflation pressure control

○

Personal mode

―

Touch sensor switch

―

Clock function

○

Notification of measurement status

○

Notification of arm cuff status

○

Body motion check

○

Irregular pulse wave rhythm check

○

WHO classification

―

Pulse pressure display

○

Memory

2 banks, each stores 60 readings
Average calculation / ○ Last 3 within 15 min
Morning , Evening sorting / ○

Operating environment
( W x H x D )

10℃ ~ 40℃
30 ~ 85% RH ( noncondensing )

Storage environment

-20℃ ~ 60℃
10 ~ 95% RH ( noncondensing )

Bluetooth

―

Power supply

AC adaptor ( ADP-W5 ) / Accessory
Battery / 4 x LR6 ( AA alkaline ) batteries

Dimensions
( W x D x H )

127.3×162.3×96mm

Weight( approx.) without batteries

331g

CE

To be applied

*Specifications are subject to change without prior notice due to improvement in performance and quality.
*Each product listed above is an authentic medical device for which a "medical device approval number" has been obtained in Japan.
*Shape of the AC adaptors for DS-10, DS-11, DSK-1011 and DSK-1031 differs from DS-G10, DS-N10 and DS-S10